Last Modified: Jul 13, 2024
Affected Product(s):
BIG-IP TMOS
Known Affected Versions:
12.1.0, 12.1.0 HF1, 12.1.0 HF2, 12.1.1, 12.1.1 HF1, 12.1.1 HF2, 12.1.2, 12.1.2 HF1, 12.1.2 HF2, 12.1.3, 12.1.3.1, 12.1.3.2, 12.1.3.3, 12.1.3.4, 12.1.3.5, 12.1.3.6, 12.1.3.7, 12.1.4, 12.1.4.1, 12.1.5, 12.1.5.1, 12.1.5.2, 12.1.5.3, 12.1.6, 13.0.0, 13.0.0 HF1, 13.0.0 HF2, 13.0.0 HF3, 13.0.1, 13.1.0, 13.1.0.1, 13.1.0.2, 13.1.0.3, 13.1.0.4, 13.1.0.5, 13.1.0.6, 13.1.0.7, 13.1.0.8, 13.1.1, 13.1.1.2, 13.1.1.3, 13.1.1.4, 13.1.1.5, 13.1.3, 13.1.3.1, 13.1.3.2, 13.1.3.3, 13.1.3.4, 13.1.3.5, 14.0.0, 14.0.0.1, 14.0.0.2, 14.0.0.3, 14.0.0.4, 14.0.0.5, 14.0.1, 14.0.1.1, 14.1.0, 14.1.0.1, 14.1.0.2, 14.1.0.3, 14.1.0.5, 14.1.0.6, 14.1.2, 14.1.2.1, 14.1.2.2, 14.1.2.3, 14.1.2.4, 14.1.2.5, 14.1.2.6, 14.1.2.7, 14.1.2.8, 14.1.3, 15.0.0, 15.0.1, 15.0.1.1, 15.0.1.2, 15.0.1.3, 15.0.1.4, 15.1.0, 15.1.0.1, 15.1.0.2, 15.1.0.3, 15.1.0.4, 15.1.0.5, 15.1.1, 16.0.0, 16.0.0.1, 16.0.1
Fixed In:
16.1.0, 16.0.1.1, 15.1.2, 14.1.3.1, 13.1.3.6
Opened: Mar 25, 2020 Severity: 3-Major
While loading configuration from the file with IMISH ('imish -f <f_name>'), the newline character gets copied at the end of each line which causes problems with commands containing regex expressions. In particular, this affects the bigip_imish_config Ansible module.
Regex expressions are not created properly.
Loading a config with 'imish -f <f_name>' commands. Note: This command is used with the bigip_imish_config Ansible module.
You can use either of the following workarounds: -- Delete and re-add the offending commands using the imish interactive shell. -- Restart tmrouted: bigstart restart tmrouted
None