Bug ID 1027237: Cannot edit virtual server in GUI after loading config with traffic-matching-criteria

Last Modified: Jan 20, 2023

Bug Tracker

Affected Product:  See more info
BIG-IP LTM(all modules)

Known Affected Versions:
14.1.0, 14.1.0.1, 14.1.0.2, 14.1.0.3, 14.1.0.5, 14.1.0.6, 14.1.2, 14.1.2.1, 14.1.2.2, 14.1.2.3, 14.1.2.4, 14.1.2.5, 14.1.2.6, 14.1.2.7, 14.1.2.8, 14.1.3, 14.1.3.1, 14.1.4, 14.1.4.1, 14.1.4.2, 14.1.4.3, 14.1.4.4, 14.1.4.5, 14.1.4.6, 14.1.5, 14.1.5.1, 14.1.5.2, 14.1.5.3, 15.0.0, 15.0.1, 15.0.1.1, 15.0.1.2, 15.0.1.3, 15.0.1.4, 15.1.0, 15.1.0.1, 15.1.0.2, 15.1.0.3, 15.1.0.4, 15.1.0.5, 15.1.1, 15.1.2, 15.1.2.1, 15.1.3, 15.1.3.1, 15.1.4, 15.1.4.1, 15.1.5, 15.1.5.1, 15.1.6, 15.1.6.1, 15.1.7, 15.1.8, 15.1.8.1, 16.0.0, 16.0.0.1, 16.0.1, 16.0.1.1, 16.0.1.2, 16.1.0, 16.1.1, 16.1.2, 16.1.2.1, 16.1.2.2, 16.1.3, 16.1.3.1, 16.1.3.2, 16.1.3.3

Opened: Jun 17, 2021
Severity: 3-Major

Symptoms

After creating a virtual server with a traffic-matching-criteria and then loading the configuration, you are unable to make changes to it in the GUI. Attempting to do so results in an error similar to: 0107028f:3: The destination (0.0.0.0) address and mask (::) for virtual server (/Common/test-vs) must be be the same type (IPv4 or IPv6).

Impact

Unable to use the GUI to edit the virtual server.

Conditions

-- A virtual server that has traffic-matching-criteria (i.e., address and/or port lists). -- The configuration has been saved at least once. -- Attempting to edit the virtual server in the GUI.

Workaround

Use TMSH to modify the virtual server.

Fix Information

None

Behavior Change