Last Modified: Apr 29, 2023
Affected Product(s):
BIG-IP All
Known Affected Versions:
11.6.0, 11.6.0 HF1, 11.6.0 HF2, 11.6.0 HF3, 11.6.0 HF4, 11.6.0 HF5, 11.6.0 HF6, 11.6.0 HF7, 11.6.0 HF8, 11.6.1, 11.6.1 HF1, 11.6.1 HF2, 11.6.2, 11.6.2 HF1, 11.6.3, 11.6.3.1, 11.6.3.2, 11.6.3.3, 11.6.3.4, 11.6.4, 11.6.5, 11.6.5.1, 11.6.5.2, 11.6.5.3, 12.0.0, 12.0.0 HF1, 12.0.0 HF2, 12.0.0 HF3, 12.0.0 HF4, 12.1.0, 12.1.0 HF1, 12.1.0 HF2, 12.1.1, 12.1.1 HF1, 12.1.1 HF2, 12.1.2, 12.1.2 HF1, 12.1.2 HF2, 12.1.3, 12.1.3.1, 12.1.3.2, 12.1.3.3, 12.1.3.4, 12.1.3.5, 12.1.3.6, 12.1.3.7, 12.1.4, 12.1.4.1, 12.1.5, 12.1.5.1, 12.1.5.2, 12.1.5.3, 12.1.6, 13.0.0, 13.0.0 HF1, 13.0.0 HF2, 13.0.0 HF3, 13.0.1, 13.1.0, 13.1.0.1, 13.1.0.2, 13.1.0.3, 13.1.0.4, 13.1.0.5, 13.1.0.6, 13.1.0.7, 13.1.0.8, 13.1.1, 13.1.1.2, 13.1.1.3, 13.1.1.4, 13.1.1.5, 13.1.3, 13.1.3.1, 13.1.3.2, 13.1.3.3, 13.1.3.4, 13.1.3.5, 13.1.3.6, 13.1.4, 13.1.4.1, 13.1.5, 13.1.5.1, 14.0.0, 14.0.0.1, 14.0.0.2, 14.0.0.3, 14.0.0.4, 14.0.0.5, 14.0.1, 14.0.1.1, 14.1.0, 14.1.0.1, 14.1.0.2, 14.1.0.3, 14.1.0.5, 14.1.0.6, 14.1.2, 14.1.2.1, 14.1.2.2, 14.1.2.3, 14.1.2.4, 14.1.2.5, 14.1.2.6, 14.1.2.7, 14.1.2.8, 14.1.3, 14.1.3.1, 14.1.4, 14.1.4.1, 14.1.4.2, 14.1.4.3, 14.1.4.4, 14.1.4.5, 14.1.4.6, 14.1.5, 14.1.5.1, 14.1.5.2, 14.1.5.3, 14.1.5.4, 15.1.0, 15.1.0.1, 15.1.0.2, 15.1.0.3, 15.1.0.4, 15.1.0.5, 15.1.1, 15.1.2, 15.1.2.1, 15.1.3, 15.1.3.1, 15.1.4, 15.1.4.1, 15.1.5, 15.1.5.1, 15.1.6, 15.1.6.1, 15.1.7, 15.1.8, 15.1.8.1, 15.1.8.2
Fixed In:
17.0.0
Opened: Sep 28, 2021 Severity: 4-Minor
When using the hard drive model HGST HUS722T1TALA604, pendsect does not recognize the hard drive and skips during sector checks.
Warning messages like the following will be logged to /var/log/messages: -- warning pendsect[31898]: skipping drive -- Model: HDC WD1005FBYZ-01YCBB2 -- warning pendsect[31898]: No known drives detected for pending sector check. Exiting Pendsect can't properly check the hard drive.
- Using a HGST HUS722T1TALA604 hard drive on a BIG-IP system. - Pendsect runs a sector check.
Give write permissions to modify file: chmod u+w /etc/pendsect/drives.xml Open the file and add the following at the end of the file, before default: <snip> <HUS722T1TA> <offset firmware="RAGNWA09">0</offset> <offset firmware="default">0</offset> <family> "HA210"</family> <wd_name>"Ultrastar"</wd_name> </HUS722T1TA> <DEFAULT> <firmware version="default"> <offset>0</offset> </firmware> <name> "UNKNOWN"</name> <family> "UNKNOWN"</family> <wd_name>"UNKNOWN"</wd_name> </DEFAULT> </model> </drives> Save and close the file. Remove write permissions so that no one accidentally modifies this file: chmod u-w /etc/pendsect/drives.xml Run the following command and check /var/log/messages to verify no errors are seen: /etc/cron.daily/pendsect
N/A
