Bug ID 1085661: Standby system saves config and changes status after sync from peer

Last Modified: May 29, 2024

Affected Product(s):
BIG-IP ASM(all modules)

Known Affected Versions:
14.1.0, 14.1.0.1, 14.1.0.2, 14.1.0.3, 14.1.0.5, 14.1.0.6, 14.1.2, 14.1.2.1, 14.1.2.2, 14.1.2.3, 14.1.2.4, 14.1.2.5, 14.1.2.6, 14.1.2.7, 14.1.2.8, 14.1.3, 14.1.3.1, 14.1.4, 14.1.4.1, 14.1.4.2, 14.1.4.3, 14.1.4.4, 14.1.4.5, 14.1.4.6, 14.1.5, 14.1.5.1, 14.1.5.2, 14.1.5.3, 14.1.5.4, 14.1.5.6, 15.1.0, 15.1.0.1, 15.1.0.2, 15.1.0.3, 15.1.0.4, 15.1.0.5, 15.1.1, 15.1.2, 15.1.2.1, 15.1.3, 15.1.3.1, 15.1.4, 15.1.4.1, 15.1.5, 15.1.5.1, 15.1.6, 15.1.6.1, 15.1.7, 15.1.8, 15.1.8.1, 15.1.8.2, 15.1.9, 15.1.9.1, 16.1.0, 16.1.1, 16.1.2, 16.1.2.1, 16.1.2.2, 16.1.3, 16.1.3.1, 16.1.3.2, 16.1.3.3, 16.1.3.4, 16.1.3.5, 17.0.0, 17.0.0.1, 17.0.0.2

Fixed In:
17.1.1, 16.1.4, 15.1.10

Opened: Mar 09, 2022

Severity: 3-Major

Symptoms

After running config sync from an Active to a Standby device, the sync status is in SYNC for a short period time. After a while, it automatically goes to Changes Pending status. The same symptom was reported via ID698757 and fixed in earlier versions, but the same can happen via different scenario.

Impact

The high availability (HA) configuration goes out of SYNC.

Conditions

Create an ASM policy and let the system determining language encoding from traffic.

Workaround

To prevent the issue from happening, you can manually configure language encoding

Fix Information

None

Behavior Change

Guides & references

K10134038: F5 Bug Tracker Filter Names and Tips