Bug ID 1100421: HTTP/2 full-proxy virtual server uses wrong source MAC address and incorrect SNAT address selection

Last Modified: Apr 09, 2026

Affected Product(s):
BIG-IP LTM(all modules)

Known Affected Versions:
14.0.0, 14.0.0.1, 14.0.0.2, 14.0.0.3, 14.0.0.4, 14.0.0.5, 14.0.1, 14.0.1.1, 14.1.0, 14.1.0.1, 14.1.0.2, 14.1.0.3, 14.1.0.5, 14.1.0.6, 14.1.2, 14.1.2.1, 14.1.2.2, 14.1.2.3, 14.1.2.4, 14.1.2.5, 14.1.2.6, 14.1.2.7, 14.1.2.8, 14.1.3, 14.1.3.1, 14.1.4, 14.1.4.1, 14.1.4.2, 14.1.4.3, 14.1.4.4, 14.1.4.5, 14.1.4.6, 14.1.5, 14.1.5.1, 14.1.5.2, 14.1.5.3, 14.1.5.4, 14.1.5.6, 15.0.0, 15.0.1, 15.0.1.1, 15.0.1.2, 15.0.1.3, 15.0.1.4, 15.1.0, 15.1.0.1, 15.1.0.2, 15.1.0.3, 15.1.0.4, 15.1.0.5, 15.1.1, 15.1.2, 15.1.2.1, 15.1.3, 15.1.3.1, 15.1.4, 15.1.4.1, 15.1.5, 15.1.5.1, 15.1.6, 15.1.6.1, 15.1.7, 15.1.8, 15.1.8.1, 15.1.8.2, 15.1.9, 15.1.9.1, 15.1.10, 15.1.10.2, 15.1.10.3, 15.1.10.4, 15.1.10.5, 15.1.10.6, 15.1.10.7, 15.1.10.8, 16.0.0, 16.0.0.1, 16.0.1, 16.0.1.1, 16.0.1.2, 16.1.0, 16.1.1, 16.1.2, 16.1.2.1, 16.1.2.2, 16.1.3, 16.1.3.1, 16.1.3.2, 16.1.3.3, 16.1.3.4, 16.1.3.5, 16.1.4, 16.1.4.1, 16.1.4.2, 16.1.4.3, 16.1.5, 16.1.5.1, 16.1.5.2, 16.1.6, 16.1.6.1, 17.0.0, 17.0.0.1, 17.0.0.2, 17.1.0, 17.1.0.1, 17.1.0.2, 17.1.0.3, 17.1.1, 17.1.1.1, 17.1.1.2, 17.1.1.3, 17.1.1.4, 17.1.2, 17.1.2.1, 17.1.2.2, 17.1.3, 17.1.3.1, 17.5.0, 17.5.1, 17.5.1.2, 17.5.1.3, 17.5.1.4, 17.5.1.5, 21.0.0, 21.0.0.1

Opened: Apr 19, 2022

Severity: 3-Major

Symptoms

When using an HTTP/2 full-proxy virtual server (with httprouter profile), server-side connections may exhibit the following issues: - Egress packets use the system base MAC address instead of the configured masquerade MAC address. - SNAT automap selects a non-floating self-IP instead of the expected floating self-IP. - SNAT pool member selection does not prefer members matching the traffic-group of the virtual server. This can cause MAC address flapping alerts on upstream network equipment and may disrupt traffic during HA failover events.

Impact

Server-side traffic uses incorrect source MAC address and may select non-floating SNAT addresses. Upstream network devices (such as switches or SDN controllers) may detect duplicate MAC/IP entries, causing traffic disruption. During HA failover, connections may not behave as expected because the correct traffic-group was not used.

Conditions

- Virtual server configured with the httprouter profile (HTTP/2 full-proxy). - Masquerade MAC address configured on a traffic-group, and/or SNAT automap or SNAT pool in use with floating self-IPs.

Workaround

None. Use a standard virtual server configuration without the httprouter profile as an alternative if HTTP/2 full-proxy is not required.

Fix Information

None

Behavior Change

Guides & references

K10134038: F5 Bug Tracker Filter Names and Tips