Bug ID 315765: The BIG-IP system erroneously performs a SNAT translation after the SNAT translation address has been disabled.

Last Modified: Oct 08, 2020

Bug Tracker

Affected Product:  See more info
BIG-IP AAM, APM, ASM, GTM, Link Controller, LTM, PEM, WAM, WOM(all modules)

Known Affected Versions:
10.1.0, 10.2.0, 10.2.1, 10.2.2, 10.2.3, 10.2.4, 11.0.0, 11.1.0, 11.2.0, 11.2.1, 11.3.0, 11.4.0, 11.4.1, 11.5.0, 11.5.1, 11.5.1 HF1, 11.5.1 HF10, 11.5.1 HF11, 11.5.1 HF2, 11.5.1 HF3, 11.5.1 HF4, 11.5.1 HF5, 11.5.1 HF6, 11.5.1 HF7, 11.5.1 HF8, 11.5.1 HF9, 11.5.10, 11.5.2, 11.5.2 HF1, 11.5.3, 11.5.3 HF1, 11.5.3 HF2, 11.5.4, 11.5.4 HF1, 11.5.4 HF2, 11.5.4 HF3, 11.5.4 HF4, 11.5.5, 11.5.6, 11.5.7, 11.5.8, 11.5.9, 11.6.0, 11.6.0 HF1, 11.6.0 HF2, 11.6.0 HF3, 11.6.0 HF4, 11.6.0 HF5, 11.6.0 HF6, 11.6.0 HF7, 11.6.0 HF8, 11.6.1, 11.6.1 HF1, 11.6.1 HF2, 11.6.2, 11.6.2 HF1, 11.6.3, 11.6.3.1, 11.6.3.2, 11.6.3.3, 11.6.3.4, 11.6.4, 11.6.5, 11.6.5.1, 11.6.5.2, 12.0.0, 12.0.0 HF1, 12.0.0 HF2, 12.0.0 HF3, 12.0.0 HF4, 12.1.0, 12.1.0 HF1, 12.1.0 HF2, 12.1.1, 12.1.1 HF1, 12.1.1 HF2, 12.1.2, 12.1.2 HF1, 12.1.2 HF2, 12.1.3, 12.1.3.1, 12.1.3.2, 12.1.3.3, 12.1.3.4, 12.1.3.5, 12.1.3.6, 12.1.3.7, 12.1.4, 12.1.4.1, 12.1.5, 12.1.5.1, 12.1.5.2, 13.0.0, 13.0.0 HF1, 13.0.0 HF2, 13.0.0 HF3, 13.0.1, 13.1.0, 13.1.0.1, 13.1.0.2, 13.1.0.3, 13.1.0.4, 13.1.0.5, 13.1.0.6, 13.1.0.7, 13.1.0.8, 13.1.1, 13.1.1.2, 13.1.1.3, 13.1.1.4, 13.1.1.5, 13.1.3, 13.1.3.1, 13.1.3.2, 13.1.3.3, 13.1.3.4, 14.0.0, 14.0.0.1, 14.0.0.2, 14.0.0.3, 14.0.0.4, 14.0.0.5, 14.0.1, 14.0.1.1, 14.1.0, 14.1.0.1, 14.1.0.2, 14.1.0.3, 14.1.0.5, 14.1.0.6, 14.1.2, 14.1.2.1, 14.1.2.2, 14.1.2.3, 14.1.2.4, 14.1.2.5, 14.1.2.6, 14.1.2.7, 14.1.2.8, 15.0.0, 15.0.1, 15.0.1.1, 15.0.1.2, 15.0.1.3, 15.0.1.4, 15.1.0, 15.1.0.1, 15.1.0.2, 15.1.0.3, 15.1.0.4, 15.1.0.5, 16.0.0, 16.0.0.1

Opened: Feb 14, 2008
Severity: 3-Major
Related AskF5 Article:
K13866

Symptoms

The BIG-IP system erroneously performs a SNAT translation after the SNAT translation address has been disabled. As a result of this issue, you may encounter the following symptom: A network trace capturing the affected traffic on a BIG-IP system shows traffic continues to egress the BIG-IP system using the disabled SNAT translation address.

Impact

Traffic egresses the BIG-IP system with the disabled SNAT translation address.

Conditions

This issue occurs when the following condition is met: A SNAT translation address is configured, but disabled.

Workaround

To work around this issue, you must delete the affected SNAT configuration instead of disabling it. To do so, perform the following procedure: Impact of workaround: Deleting the affected SNAT configuration removes it entirely from the BIG-IP configuration. If you require the SNAT configuration later, you must recreate it manually. BIG-IP 11.x/12.x 1. Log in to the tmsh utility. 2. Delete the affected SNAT configuration by entering the following command: delete /ltm snat <affected SNAT name>. For example, to delete the test-315765 SNAT configuration, you would enter the following command: delete /ltm snat test-315765. 3. Save the modified configuration by entering the following command: save /sys config BIG-IP 9.x through 10.x 1. Log in to the command line. 2. Delete the affected SNAT configuration by entering the following command: bigpipe snat <affected SNAT name> delete. For example, to delete the test-315765 SNAT configuration, you would enter the following command: bigpipe snat test-315765 delete. 3. Save the modified configuration by entering the following command: bigpipe save all.

Fix Information

None

Behavior Change