Bug ID 525153: One extra manual sync is required when making configuration changes from standby devices

Last Modified: Nov 07, 2022

Bug Tracker

Affected Product:  See more info
BIG-IP AFM(all modules)

Known Affected Versions:
12.0.0, 12.0.0 HF1, 12.0.0 HF2, 12.0.0 HF3, 12.0.0 HF4, 12.1.0, 12.1.0 HF1, 12.1.0 HF2, 12.1.1, 12.1.1 HF1, 12.1.1 HF2, 12.1.2, 12.1.2 HF1, 12.1.2 HF2, 12.1.3, 12.1.3.1, 12.1.3.2, 12.1.3.3, 12.1.3.4, 12.1.3.5, 12.1.3.6, 12.1.3.7, 12.1.4, 12.1.4.1, 12.1.5, 12.1.5.1, 12.1.5.2, 12.1.5.3, 12.1.6, 13.0.0, 13.0.0 HF1, 13.0.0 HF2, 13.0.0 HF3, 13.0.1, 13.1.0, 13.1.0.1, 13.1.0.2, 13.1.0.3, 13.1.0.4, 13.1.0.5, 13.1.0.6, 13.1.0.7, 13.1.0.8, 13.1.1, 13.1.1.2, 13.1.1.3, 13.1.1.4, 13.1.1.5, 13.1.3, 13.1.3.1, 13.1.3.2, 13.1.3.3, 13.1.3.4, 13.1.3.5, 13.1.3.6, 13.1.4, 13.1.4.1, 13.1.5, 13.1.5.1

Opened: May 26, 2015
Severity: 3-Major

Symptoms

On a HA pair with manual sync enabled device groups, changes made on the standby need to be synced twice if on-demand compilation or on-demand rule deployment is enabled.

Impact

One extra manual sync is required.

Conditions

This only happen when 1. The BIG-IP configuration contains device groups that are configured to "manual sync". 2. The configuration change is done from standby device.

Workaround

The general guideline of using the on-demand features is that all configuration changes should be done from Active device, not from standby devices.

Fix Information

None

Behavior Change