Bug ID 584865: Primary slot mismatch after primary cluster member leaves and then rejoins the cluster

Last Modified: Nov 07, 2022

Bug Tracker

Affected Product:  See more info
BIG-IP TMOS(all modules)

Known Affected Versions:
11.5.1, 11.5.1 HF1, 11.5.1 HF10, 11.5.1 HF11, 11.5.1 HF2, 11.5.1 HF3, 11.5.1 HF4, 11.5.1 HF5, 11.5.1 HF6, 11.5.1 HF7, 11.5.1 HF8, 11.5.1 HF9, 11.5.10, 11.5.2, 11.5.2 HF1, 11.5.3, 11.5.3 HF1, 11.5.3 HF2, 11.5.4, 11.5.4 HF1, 11.5.4 HF2, 11.5.4 HF3, 11.5.4 HF4, 11.5.5, 11.5.6, 11.5.7, 11.5.8, 11.5.9, 11.6.0, 11.6.0 HF1, 11.6.0 HF2, 11.6.0 HF3, 11.6.0 HF4, 11.6.0 HF5, 11.6.0 HF6, 11.6.0 HF7, 11.6.0 HF8, 11.6.1, 11.6.1 HF1, 11.6.1 HF2, 11.6.2, 11.6.2 HF1, 11.6.3, 11.6.3.1, 11.6.3.2, 11.6.3.3, 11.6.3.4, 11.6.4, 11.6.5, 11.6.5.1, 11.6.5.2, 12.1.0, 12.1.0 HF1, 12.1.0 HF2, 12.1.1, 12.1.1 HF1, 12.1.1 HF2, 12.1.2, 12.1.2 HF1, 12.1.2 HF2, 12.1.3, 12.1.3.1

Fixed In:
13.0.0, 12.1.3.2, 11.6.5.3

Opened: Apr 01, 2016
Severity: 3-Major

Symptoms

Secondary blades in a Viprion system can disagree about the identity of the Primary blade.

Impact

Configuration and status may not be kept properly in sync between blades.

Conditions

Viprion chassis with 3 or more blades. If the primary is temporarily isolated from the other blades, a new primary will be elected. When the primary rejoins, the non-primary blades do not correctly switch back to the newly re-elected primary.

Workaround

None

Fix Information

Secondary blades properly identify the Primary on changes.

Behavior Change