Bug ID 592503: TMM 'timer' device does not report 'busy' for non-priority timers.

Last Modified: Jul 03, 2019

Bug Tracker

Affected Product:  See more info
BIG-IP All(all modules)

Known Affected Versions:
11.5.1, 11.5.1 HF1, 11.5.1 HF10, 11.5.1 HF11, 11.5.1 HF2, 11.5.1 HF3, 11.5.1 HF4, 11.5.1 HF5, 11.5.1 HF6, 11.5.1 HF7, 11.5.1 HF8, 11.5.1 HF9, 11.5.2, 11.5.2 HF1, 11.5.3, 11.5.3 HF1, 11.5.3 HF2, 11.5.4, 11.5.4 HF1, 11.5.4 HF2, 11.5.4 HF3, 11.5.4 HF4, 11.5.5, 11.5.6, 11.5.7, 11.5.8, 11.5.9, 11.6.0, 11.6.0 HF1, 11.6.0 HF2, 11.6.0 HF3, 11.6.0 HF4, 11.6.0 HF5, 11.6.0 HF6, 11.6.0 HF7, 11.6.0 HF8, 11.6.1, 11.6.1 HF1, 11.6.1 HF2, 11.6.2, 11.6.2 HF1, 11.6.3, 11.6.3.1, 11.6.3.2, 11.6.3.3, 11.6.3.4, 11.6.4, 12.0.0, 12.0.0 HF1, 12.0.0 HF2, 12.0.0 HF3, 12.0.0 HF4, 12.1.0, 12.1.0 HF1, 12.1.0 HF2, 12.1.1, 12.1.1 HF1, 12.1.1 HF2, 12.1.2, 12.1.2 HF1, 12.1.2 HF2, 12.1.3, 12.1.3.1, 12.1.3.2, 12.1.3.3, 12.1.3.4, 12.1.3.5, 12.1.3.6, 12.1.3.7, 12.1.4, 12.1.4.1, 13.0.0, 13.0.0 HF1, 13.0.0 HF2, 13.0.0 HF3, 13.0.1, 13.1.0, 13.1.0.1, 13.1.0.2, 13.1.0.3, 13.1.0.4, 13.1.0.5, 13.1.0.6, 13.1.0.7, 13.1.0.8, 13.1.1, 13.1.1.1, 13.1.1.2, 13.1.1.3, 13.1.1.4, 13.1.1.5, 14.0.0, 14.0.0.1, 14.0.0.2, 14.0.0.3, 14.0.0.4, 14.0.0.5, 14.1.0, 14.1.0.1, 14.1.0.2, 14.1.0.3, 14.1.0.4, 14.1.0.5, 14.1.0.6

Opened: May 11, 2016
Severity: 4-Minor

Symptoms

A discrepancy in CPU utilization reporting can observed when looking at different utilities or reporting systems (i.e. top, tmctl, SNMP, the performance graphs in the GUI, etc.). Specifically, certain utilities may report that TMM hyperthreads are 100% busy, while other utilities may indicate that TMM instances are only moderately busy. In this case, the utilities or systems reporting the higher CPU utilization are correct.

Impact

A BIG-IP Administrator monitoring CPU utilization on the system may be confused about how busy TMM actually is. Although the main impacted system here is the tmm/stat tmctl table, these values are also exposed via the sysTmmStatTmUsageRatio5s MIB (which is more likely to be monitored by a BIG-IP Administrator).

Conditions

This issue has been seen extremely rarely, as it requires some other edge condition to also be occurring (TMM firing non-priority timers in a looping manner).

Workaround

Refer to utilities such as 'top' to monitor the CPU utilization of TMM hyperthreads.

Fix Information

None

Behavior Change