Last Modified: Nov 07, 2022
Affected Product(s):
BIG-IP All
Known Affected Versions:
11.5.1, 11.5.1 HF1, 11.5.1 HF10, 11.5.1 HF11, 11.5.1 HF2, 11.5.1 HF3, 11.5.1 HF4, 11.5.1 HF5, 11.5.1 HF6, 11.5.1 HF7, 11.5.1 HF8, 11.5.1 HF9, 11.5.10, 11.5.2, 11.5.2 HF1, 11.5.3, 11.5.3 HF1, 11.5.3 HF2, 11.5.4, 11.5.4 HF1, 11.5.4 HF2, 11.5.4 HF3, 11.5.4 HF4, 11.5.5, 11.5.6, 11.5.7, 11.5.8, 11.5.9, 11.6.0, 11.6.0 HF1, 11.6.0 HF2, 11.6.0 HF3, 11.6.0 HF4, 11.6.0 HF5, 11.6.0 HF6, 11.6.0 HF7, 11.6.0 HF8, 11.6.1, 11.6.1 HF1, 11.6.1 HF2, 11.6.2, 11.6.2 HF1, 11.6.3, 11.6.3.1, 11.6.3.2, 11.6.3.3, 11.6.3.4, 11.6.4, 11.6.5, 11.6.5.1, 11.6.5.2, 11.6.5.3, 12.0.0, 12.0.0 HF1, 12.0.0 HF2, 12.0.0 HF3, 12.0.0 HF4, 12.1.0, 12.1.0 HF1, 12.1.0 HF2, 12.1.1, 12.1.1 HF1, 12.1.1 HF2, 12.1.2, 12.1.2 HF1, 12.1.2 HF2, 12.1.3, 12.1.3.1, 12.1.3.2, 12.1.3.3, 12.1.3.4, 12.1.3.5, 12.1.3.6, 12.1.3.7, 12.1.4, 12.1.4.1, 12.1.5, 12.1.5.1, 12.1.5.2, 12.1.5.3, 12.1.6
Fixed In:
13.0.0
Opened: Jun 01, 2016 Severity: 3-Major Related Article:
K81793515
Using tmsh, you can configure the mirroring IP address using the command tmsh modify cm device devicename mirror-secondary-ip ip_address It is possible to set ip_address to a floating self IP address when using tmsh, but BIG-IP can't mirror to a floating self IP address. The tmsh command will complete without error.
Mirroring does not work in this case. If you configured it this way using tmsh, the GUI will show the primary and secondary mirroring address as "None".
Accidentally setting the mirroring IP address to the floating self IP address using tmsh.
Change the mirroring address to a non floating self IP address. The GUI will only present non floating self IP addresses. For more information about mirroring, see K13478: Overview of connection and persistence mirroring at https://support.f5.com/csp/#/article/K13478
None