Last Modified: Apr 28, 2025
Affected Product(s):
BIG-IP AFM
Known Affected Versions:
11.5.3, 11.5.3 HF1, 11.5.3 HF2, 11.5.4, 11.5.4 HF1, 11.5.4 HF2, 11.5.4 HF3, 11.5.4 HF4, 11.5.5, 11.5.6, 11.5.7, 11.5.8, 11.5.9, 11.5.10, 11.6.0, 11.6.0 HF1, 11.6.0 HF2, 11.6.0 HF3, 11.6.0 HF4, 11.6.0 HF5, 11.6.0 HF6, 11.6.0 HF7, 11.6.0 HF8, 11.6.1, 11.6.1 HF1, 11.6.1 HF2, 11.6.2, 11.6.2 HF1, 11.6.3, 11.6.3.1, 11.6.3.2, 11.6.3.3, 11.6.3.4, 11.6.4, 11.6.5, 11.6.5.1, 11.6.5.2, 11.6.5.3, 12.0.0, 12.0.0 HF1, 12.0.0 HF2, 12.0.0 HF3, 12.0.0 HF4, 12.1.0, 12.1.0 HF1, 12.1.0 HF2, 12.1.1, 12.1.1 HF1, 12.1.1 HF2, 12.1.2
Fixed In:
13.0.0, 12.1.2 HF1
Opened: Aug 10, 2016 Severity: 3-Major Related Article:
K43320840
In Cluster setup with multiple blades, if configurations do not have management IP addresses assigned to individual blades, but instead assign a cluster management IP address list to the cluster of blades. The configuration load will fail. System posts an error message similar to the following: err mcpd[24235]: 01071824:3: The address list is referenced by one of the rules of the admin IP either directly or in a nested manner, and the entry is of a different address family from that of the Admin IP.
After reboot, configuration load failure on secondary blades.
1. Cluster setup with multiple blades. 2. No management IP assigned to individual blades. 3. Assign cluster management IP address list to the cluster of blades.
Define the cluster management IP address as the destination (in rule) without using address list.
Config load failure no longer occurs when cluster management IP is not defined, but instead uses address-list.