Bug ID 671720: TMM may over-count traffic throughput

Last Modified: Jul 03, 2019

Bug Tracker

Affected Product:  See more info
BIG-IP LTM(all modules)

Known Affected Versions:
11.6.0, 11.6.0 HF1, 11.6.0 HF2, 11.6.0 HF3, 11.6.0 HF4, 11.6.0 HF5, 11.6.0 HF6, 11.6.0 HF7, 11.6.0 HF8, 11.6.1, 11.6.1 HF1, 11.6.1 HF2, 11.6.2, 11.6.2 HF1, 11.6.3, 11.6.3.1, 11.6.3.2, 11.6.3.3, 11.6.3.4, 11.6.4, 12.0.0, 12.0.0 HF1, 12.0.0 HF2, 12.0.0 HF3, 12.0.0 HF4, 12.1.0, 12.1.0 HF1, 12.1.0 HF2, 12.1.1, 12.1.1 HF1, 12.1.1 HF2, 12.1.2, 12.1.2 HF1, 12.1.2 HF2, 12.1.3, 12.1.3.1, 12.1.3.2, 12.1.3.3, 12.1.3.4, 12.1.3.5, 12.1.3.6, 12.1.3.7, 12.1.4, 12.1.4.1, 13.0.0, 13.0.0 HF1, 13.0.0 HF2, 13.0.0 HF3, 13.0.1, 13.1.0, 13.1.0.1, 13.1.0.2, 13.1.0.3, 13.1.0.4, 13.1.0.5, 13.1.0.6, 13.1.0.7, 13.1.0.8, 13.1.1, 13.1.1.1, 13.1.1.2, 13.1.1.3, 13.1.1.4, 13.1.1.5, 14.0.0, 14.0.0.1, 14.0.0.2, 14.0.0.3, 14.0.0.4, 14.0.0.5, 14.1.0, 14.1.0.1, 14.1.0.2, 14.1.0.3, 14.1.0.4, 14.1.0.5, 14.1.0.6

Opened: Jun 29, 2017
Severity: 3-Major

Symptoms

In certain traffic configurations, it may be possible for a packet to be over-counted. If this repeatedly occurs, counters may hold excessively large throughput values.

Impact

Traffic counters may hold incorrect, inflated results, including reporting higher throughput than the capacity from all available interfaces on the platform. This occurs because there are three places that count pkts_in, pkts_out, bytes_in, and bytes_out. These same counters do not reset throughput values, so reported statistics might be incorrect or contain inflated values.

Conditions

This might occur in any configuration when statistics are gathered, and depends on traffic, specifically pkts_in, pkts_out, bytes_in, and bytes_out flows that are in rejected flows, flows that contain syncookies, and flows that validate syncookies.

Workaround

None.

Fix Information

None

Behavior Change