Last Modified: Sep 13, 2023
Affected Product(s):
BIG-IP LTM
Known Affected Versions:
11.6.0, 11.6.1, 11.6.2, 11.6.3, 11.6.3.1, 11.6.3.2, 11.6.3.3, 11.6.3.4, 11.6.4, 11.6.5, 11.6.5.1, 11.6.5.2, 11.6.5.3, 12.0.0, 12.0.0 HF1, 12.1.0 HF1, 12.0.0 HF2, 12.1.0 HF2, 12.0.0 HF3, 12.0.0 HF4, 12.1.1 HF1, 12.1.1 HF2, 12.1.2 HF1, 12.1.2 HF2, 12.1.0, 12.1.1, 12.1.2, 12.1.3, 12.1.3.1, 12.1.3.2, 12.1.3.3, 12.1.3.4, 12.1.3.5, 12.1.3.6, 12.1.3.7, 12.1.4, 12.1.4.1, 12.1.5, 12.1.5.1, 12.1.5.2, 12.1.5.3, 12.1.6, 13.0.0, 13.0.0 HF1, 13.0.0 HF2, 13.0.0 HF3, 13.0.1, 13.1.0, 13.1.0.1, 13.1.0.2, 13.1.0.3, 13.1.0.4, 13.1.0.5, 13.1.0.6, 13.1.0.7, 13.1.0.8, 13.1.1, 13.1.1.2, 13.1.1.3, 13.1.1.4, 13.1.1.5, 13.1.3, 13.1.3.1, 13.1.3.2, 13.1.3.3, 13.1.3.4, 13.1.3.5, 13.1.3.6, 13.1.4, 13.1.4.1, 13.1.5, 13.1.5.1
Fixed In:
14.0.0
Opened: Jul 10, 2017 Severity: 3-Major Related Article:
K06548092
When a link local address is configured as a default gateway there is an error when running the 'tmsh load sys config' command: Syntax Error:(/config/bigip.conf at line: 1017) "default" unknown property. /config/bigip.config is incorrectly written with an empty interface value: cat bigip.conf|grep 'net route' -A4 net route /Common/External_default_GW { gw 169.254.200.1 interface network default }
The default gateway works, but bigip.conf may not be loaded via tmsh with the command 'load sys config'.
-- config.allow.rfc3927 database key set to enable. -- Link local address is configured as a default gateway, as shown in the following example: cat bigip.conf|grep 'net route' -A4 net route /Common/External_default_GW { gw 169.254.200.1 interface <== This is the error network default }
Modify the bigip.conf file, adding the correct interface, as shown in the following example, which uses 'interface Ext': cat bigip.conf|grep 'net route' -A4 net route /Common/External_default_GW { gw 169.254.200.1 interface Ext network default }
None