Last Modified: Nov 07, 2022
Affected Product:
See more info
BIG-IP DNS, GTM, TMOS
Known Affected Versions:
11.6.0, 11.6.0 HF1, 11.6.0 HF2, 11.6.0 HF3, 11.6.0 HF4, 11.6.0 HF5, 11.6.0 HF6, 11.6.0 HF7, 11.6.0 HF8, 11.6.1, 11.6.1 HF1, 11.6.1 HF2, 11.6.2, 11.6.2 HF1, 11.6.3, 11.6.3.1, 11.6.3.2, 11.6.3.3, 11.6.3.4, 11.6.4, 11.6.5, 11.6.5.1, 11.6.5.2, 11.6.5.3, 12.1.0, 12.1.0 HF1, 12.1.0 HF2, 12.1.1, 12.1.1 HF1, 12.1.1 HF2, 12.1.2, 12.1.2 HF1, 12.1.2 HF2, 12.1.3, 12.1.3.1, 12.1.3.2, 12.1.3.3, 12.1.3.4, 12.1.3.5, 12.1.3.6, 12.1.3.7, 12.1.4, 12.1.4.1, 12.1.5, 12.1.5.1, 12.1.5.2, 12.1.5.3, 12.1.6, 13.0.0, 13.0.0 HF1, 13.0.0 HF2, 13.0.0 HF3, 13.0.1, 13.1.0, 13.1.0.1, 13.1.0.2, 13.1.0.3, 13.1.0.4, 13.1.0.5, 13.1.0.6, 13.1.0.7, 13.1.0.8, 13.1.1, 13.1.1.2, 13.1.1.3, 13.1.1.4, 13.1.1.5, 13.1.3, 13.1.3.1, 13.1.3.2, 13.1.3.3, 13.1.3.4, 13.1.3.5, 13.1.3.6, 13.1.4, 13.1.4.1, 13.1.5, 13.1.5.1
Fixed In:
14.0.0
Opened: Jul 26, 2017
Severity: 2-Critical
If you have a CNAME Pool and an AAAA, MX, NAPTR, or SRV pool in the same wide IP, running a 'list' command in TMSH shows only the CNAME pool.
-- Cannot properly view the full configuration through TMSH (e.g., list gtm or list gtm wideip) does not show the full configuration of wide IP with a CNAME-type pool. -- Cannot save the configuration that is not displayed by the 'list' command.
-- A wide IP with a CNAME-type pool and an AAAA-, MX-, NAPTR-, or SRV-type pool. -- Running a 'list' command in TMSH, e.g.: - list gtm - list gtm wideip
To view the full configuration, use a specific wide IP: list gtm wideip <type> <wideip>
Fixed an issue preventing certain types of GTM pools from showing up as configured under a GTM wide IP when a CNAME-type pool was also present.
