Last Modified: Sep 13, 2023
Affected Product(s):
BIG-IP All
Known Affected Versions:
11.5.4, 11.5.5, 11.5.6, 11.5.7, 11.5.8, 11.5.9, 11.5.10, 11.6.0, 11.6.1, 11.6.2, 11.6.3, 11.6.3.1, 11.6.3.2, 11.6.3.3, 11.6.3.4, 11.6.4, 11.6.5, 11.6.5.1, 11.6.5.2, 11.6.5.3, 12.0.0, 12.0.0 HF1, 12.1.0 HF1, 12.0.0 HF2, 12.1.0 HF2, 12.0.0 HF3, 12.0.0 HF4, 12.1.1 HF1, 12.1.1 HF2, 12.1.2 HF1, 12.1.2 HF2, 12.1.0, 12.1.1, 12.1.2, 12.1.3, 12.1.3.1, 12.1.3.2, 12.1.3.3, 12.1.3.4, 12.1.3.5, 12.1.3.6, 12.1.3.7, 12.1.4, 12.1.4.1, 12.1.5, 12.1.5.1, 12.1.5.2, 12.1.5.3, 12.1.6, 13.0.0, 13.0.0 HF1, 13.0.0 HF2, 13.0.0 HF3, 13.0.1, 13.1.0, 13.1.0.1, 13.1.0.2, 13.1.0.3, 13.1.0.4, 13.1.0.5, 13.1.0.6, 13.1.0.7, 13.1.0.8, 13.1.1
Fixed In:
14.0.0, 13.1.1.2
Opened: Sep 12, 2017 Severity: 4-Minor
If you have a virtual address and a self IP that both listen on the same IP address, changing the traffic group of the self IP will make an equivalent change to the traffic group of the virtual address. However, this does not work in reverse. Changing the traffic group of the virtual address will not cause a change of the traffic group of the self IP.
This is by design, but is counterintuitive, and there is no warning message that this is the case. Setting the traffic group on both objects will always work properly.
You have a virtual address and a self IP that both listen on the same IP address. (The subnet mask need not be the same.)
Care should be taken to ensure that the desired traffic group is set on both objects.
None