Bug ID 706115: MCPD configuration load fails after reboot if user manually configures a static route while 1nic autoconfig is enabled.

Last Modified: Nov 07, 2022

Bug Tracker

Affected Product:  See more info
BIG-IP LTM, MA-VE(all modules)

Known Affected Versions:
12.1.0, 12.1.0 HF1, 12.1.0 HF2, 12.1.1, 12.1.1 HF1, 12.1.1 HF2, 12.1.2, 12.1.2 HF1, 12.1.2 HF2, 12.1.3, 12.1.3.1, 12.1.3.2, 12.1.3.3, 12.1.3.4, 12.1.3.5, 12.1.3.6, 12.1.3.7, 12.1.4, 12.1.4.1, 12.1.5, 12.1.5.1, 12.1.5.2, 12.1.5.3, 12.1.6, 13.0.0, 13.0.0 HF1, 13.0.0 HF2, 13.0.0 HF3, 13.0.1, 13.1.0, 13.1.0.1, 13.1.0.2, 13.1.0.3, 13.1.0.4, 13.1.0.5, 13.1.0.6, 13.1.0.7, 13.1.0.8, 13.1.1, 13.1.1.2, 13.1.1.3, 13.1.1.4, 13.1.1.5, 13.1.3, 13.1.3.1, 13.1.3.2, 13.1.3.3, 13.1.3.4, 13.1.3.5, 13.1.3.6, 13.1.4, 13.1.4.1, 13.1.5, 13.1.5.1

Fixed In:
14.1.0

Opened: Feb 09, 2018
Severity: 3-Major

Symptoms

User has configured a single-nic BIG-IP VE with 1nic autoconfig enabled. The status of this DB variable can be seen through "tmsh list sys db provision.1nicautoconfig".

Impact

After reboot, MCPD never reaches "active" state as config load fails. This happens because the static route gateway becomes unreachable.

Conditions

User configures a static net route through "tmsh create net route" that depends on the self-ip to reach out to the gateway associated with this static route.

Workaround

- User must disable "provision.1nicautoconfig" before creating net static routes with the following command: tmsh modify sys db provision.1nicautoconfig value disable

Fix Information

In a single-nic configuration, disable "provision.1nicautoconfig" before manually creating net static routes.

Behavior Change