Bug ID 715331: IKEv2 logs peers_id comparisons and cert verfication failures

Last Modified: Jun 20, 2019

Bug Tracker

Affected Product:  See more info
BIG-IP TMOS(all modules)

Known Affected Versions:
11.6.0, 11.6.0 HF1, 11.6.0 HF2, 11.6.0 HF3, 11.6.0 HF4, 11.6.0 HF5, 11.6.0 HF6, 11.6.0 HF7, 11.6.0 HF8, 11.6.1, 11.6.1 HF1, 11.6.1 HF2, 11.6.2, 11.6.2 HF1, 11.6.3, 11.6.3.1, 11.6.3.2, 11.6.3.3, 11.6.3.4, 11.6.4, 12.0.0, 12.0.0 HF1, 12.0.0 HF2, 12.0.0 HF3, 12.0.0 HF4, 12.1.0, 12.1.0 HF1, 12.1.0 HF2, 12.1.1, 12.1.1 HF1, 12.1.1 HF2, 12.1.2, 12.1.2 HF1, 12.1.2 HF2, 12.1.3, 12.1.3.1, 12.1.3.2, 12.1.3.3, 12.1.3.4, 12.1.3.5, 12.1.3.6, 12.1.3.7, 12.1.4, 12.1.4.1, 13.0.0, 13.0.0 HF1, 13.0.0 HF2, 13.0.0 HF3, 13.0.1, 13.1.0, 13.1.0.1, 13.1.0.2, 13.1.0.3, 13.1.0.4, 13.1.0.5, 13.1.0.6, 13.1.0.7, 13.1.0.8, 13.1.1, 13.1.1.1, 13.1.1.2, 13.1.1.3, 13.1.1.4, 13.1.1.5, 14.0.0, 14.0.0.1, 14.0.0.2, 14.0.0.3, 14.0.0.4, 14.0.0.5

Fixed In:
14.1.0

Opened: Apr 16, 2018
Severity: 4-Minor

Symptoms

Insufficient information is logged when a certificate fails verification, or when ID_I in an IKE_AUTH request does not match configuration for peers_id in the ike-peer description.

Impact

Hard to diagnose proximate cause of IKE negotiation failure during IKE_AUTH exchange.

Conditions

When IKE_AUTH fails due to either certificate verification failure or mismatch of ID_I and peers_id.

Workaround

There is no workaround at this time.

Fix Information

When log level is at least debug, each ID_I and peers_id comparison is logged, so both config and IKE_AUTH payload content is clearly revealed. When certificate verification occurs, failure is now always logged with PROTO_ERR level, and success is also logged with INFO level when log level is at least debug.

Behavior Change