Bug ID 721892: Pfmand on vCMP guests does not recover after service interruption

Last Modified: Jul 23, 2021

Bug Tracker

Affected Product:  See more info
BIG-IP vCMP(all modules)

Known Affected Versions:
13.1.0, 13.1.0.1, 13.1.0.2, 13.1.0.3, 13.1.0.4, 13.1.0.5, 13.1.0.6, 13.1.0.7, 13.1.0.8, 13.1.1, 13.1.1.2, 13.1.1.3, 13.1.1.4, 13.1.1.5, 13.1.3, 13.1.3.1, 13.1.3.2, 13.1.3.3, 13.1.3.4, 13.1.3.5, 13.1.3.6, 13.1.4, 13.1.4.1, 14.0.0, 14.0.0.1, 14.0.0.2, 14.0.0.3, 14.0.0.4, 14.0.0.5, 14.0.1, 14.0.1.1, 14.1.0, 14.1.0.1, 14.1.0.2, 14.1.0.3, 14.1.0.5, 14.1.0.6, 14.1.2, 14.1.2.1, 14.1.2.2, 14.1.2.3, 14.1.2.4, 14.1.2.5, 14.1.2.6, 14.1.2.7, 14.1.2.8, 14.1.3, 14.1.3.1, 14.1.4, 14.1.4.1, 14.1.4.2, 14.1.4.3, 15.0.0, 15.0.1, 15.0.1.1, 15.0.1.2, 15.0.1.3, 15.0.1.4, 15.1.0, 15.1.0.1, 15.1.0.2, 15.1.0.3, 15.1.0.4, 15.1.0.5, 15.1.1, 15.1.2, 15.1.2.1, 15.1.3, 15.1.3.1, 16.0.0, 16.0.0.1, 16.0.1, 16.0.1.1, 16.0.1.2, 16.1.0

Opened: May 25, 2018
Severity: 3-Major

Symptoms

If pfmand on a vCMP host shuts down and starts back up, pfmand running on any of the vCMP guests loses connection and does not recover.

Impact

Pfmand on vCMP guests loses connection: warning pfmand[20332]: 01660005:4: No connection to hypervisor.

Conditions

- vCMP host and guest(s) both have pfmand.healthstatus set to "enable" - pfmand on the host shuts down and starts up again. This can sometimes occur due to re-licensing on the host.

Workaround

Rebooting the vCMP host will allow the pfmand connection to be be re-established.

Fix Information

None

Behavior Change