Last Modified: Apr 28, 2025
Affected Product(s):
BIG-IP APM
Known Affected Versions:
13.1.0, 13.1.0.1, 13.1.0.2, 13.1.0.3, 13.1.0.4, 13.1.0.5, 13.1.0.6, 13.1.0.7, 13.1.0.8, 13.1.1, 13.1.1.2, 13.1.1.3, 13.1.1.4, 13.1.1.5, 13.1.3, 13.1.3.1, 13.1.3.2, 13.1.3.3, 13.1.3.4, 13.1.3.5, 13.1.3.6, 13.1.4, 13.1.4.1, 13.1.5, 13.1.5.1, 14.0.0, 14.0.0.1, 14.0.0.2, 14.0.0.3, 14.0.0.4, 14.0.0.5, 14.0.1, 14.0.1.1, 14.1.0, 14.1.0.1, 14.1.0.2, 14.1.0.3, 14.1.0.5, 14.1.0.6, 14.1.2, 14.1.2.1, 14.1.2.2, 14.1.2.3, 14.1.2.4, 14.1.2.5, 14.1.2.6, 14.1.2.7, 14.1.2.8, 14.1.3, 14.1.3.1, 14.1.4, 14.1.4.1, 14.1.4.2, 14.1.4.3, 14.1.4.4, 14.1.4.5, 14.1.4.6, 14.1.5, 14.1.5.1, 14.1.5.2, 14.1.5.3, 14.1.5.4, 14.1.5.6, 15.0.0, 15.0.1, 15.0.1.1, 15.0.1.2, 15.0.1.3, 15.0.1.4
Opened: Jun 07, 2018 Severity: 3-Major
BIG-IP software has a procedure to reset the configuration to factory defaults: load sys config defaults This command clears most of the BIG-IP configuration, but does not delete objects inside of the Access Guided Config (AGC) configuration database.
Configurations made with AGC (iApps LX) are not removed. There is no particular functional impact, but these customization deployment objects remain on the system.
-- Configuration containing AGC deployments. -- Use the following command to reset the configuration to factory defaults: tmsh load sys config default
To work around this, use the following procedure: 1. Run the command 'load sys config default'. 2. Wait until the BIG-IP system has been reset. 3. Navigate to iApps :: Application Services :: Applications LX. 4. Use the GUI to delete all apps.
None