Bug ID 750712: A pool with allow-snat set to 'no' will permanently disable snat for the connection.

Last Modified: Jan 20, 2023

Bug Tracker

Affected Product:  See more info
BIG-IP LTM(all modules)

Known Affected Versions:
13.1.0, 13.1.0.1, 13.1.0.2, 13.1.0.3, 13.1.0.4, 13.1.0.5, 13.1.0.6, 13.1.0.7, 13.1.0.8, 13.1.1, 13.1.1.2, 13.1.1.3, 13.1.1.4, 13.1.1.5, 13.1.3, 13.1.3.1, 13.1.3.2, 13.1.3.3, 13.1.3.4, 13.1.3.5, 13.1.3.6, 13.1.4, 13.1.4.1, 13.1.5, 13.1.5.1, 14.1.0, 14.1.0.1, 14.1.0.2, 14.1.0.3, 14.1.0.5, 14.1.0.6, 14.1.2, 14.1.2.1, 14.1.2.2, 14.1.2.3, 14.1.2.4, 14.1.2.5, 14.1.2.6, 14.1.2.7, 14.1.2.8, 14.1.3, 14.1.3.1, 14.1.4, 14.1.4.1, 14.1.4.2, 14.1.4.3, 14.1.4.4, 14.1.4.5, 14.1.4.6, 14.1.5, 14.1.5.1, 14.1.5.2, 14.1.5.3, 15.1.0, 15.1.0.1, 15.1.0.2, 15.1.0.3, 15.1.0.4, 15.1.0.5, 15.1.1, 15.1.2, 15.1.2.1, 15.1.3, 15.1.3.1, 15.1.4, 15.1.4.1, 15.1.5, 15.1.5.1, 15.1.6, 15.1.6.1, 15.1.7, 15.1.8, 15.1.8.1, 16.0.0, 16.0.0.1, 16.0.1, 16.0.1.1, 16.0.1.2, 16.1.0, 16.1.1, 16.1.2, 16.1.2.1, 16.1.2.2, 16.1.3, 16.1.3.1, 16.1.3.2, 16.1.3.3, 17.0.0, 17.0.0.1, 17.0.0.2

Opened: Nov 21, 2018
Severity: 3-Major

Symptoms

A server-side connection is established that does not use a source address translation address even though a source address translation should apply.

Impact

Incorrect source address used for some server-side connections.

Conditions

A virtual server is configured to use more than one pool and the pools have a combination of allow-snat yes (the default) and allow-snat no. Multiple pools could be configured through an iRule or L7 policy. Multiple requests are made on a connection. After a request is sent to a pool with allow-snat set to no, future requests on the connection that use an allow-snat yes pool will not use source-address translation even though the configuration implies that they should.

Workaround

When altering the pool selection per request, also explicitly set the source address translation if necessary.

Fix Information

None

Behavior Change