Bug ID 752933: Mask None on source or destination persistence profile on GUI result in "0.0.0.0" mask

Last Modified: Sep 11, 2019

Bug Tracker

Affected Product:  See more info
BIG-IP LTM(all modules)

Known Affected Versions:
12.1.0, 12.1.0 HF1, 12.1.0 HF2, 12.1.1, 12.1.1 HF1, 12.1.1 HF2, 12.1.2, 12.1.2 HF1, 12.1.2 HF2, 12.1.3, 12.1.3.1, 12.1.3.2, 12.1.3.3, 12.1.3.4, 12.1.3.5, 12.1.3.6, 12.1.3.7, 12.1.4, 12.1.4.1, 12.1.5, 13.0.0, 13.0.0 HF1, 13.0.0 HF2, 13.0.0 HF3, 13.0.1, 13.1.0, 13.1.0.1, 13.1.0.2, 13.1.0.3, 13.1.0.4, 13.1.0.5, 13.1.0.6, 13.1.0.7, 13.1.0.8, 13.1.1, 13.1.1.1, 13.1.1.2, 13.1.1.3, 13.1.1.4, 13.1.1.5, 13.1.3, 14.0.0, 14.0.0.1, 14.0.0.2, 14.0.0.3, 14.0.0.4, 14.0.0.5, 14.0.1, 14.1.0, 14.1.0.1, 14.1.0.2, 14.1.0.3, 14.1.0.4, 14.1.0.5, 14.1.0.6, 14.1.2, 15.0.0, 15.0.1

Opened: Dec 13, 2018
Severity: 5-Cosmetic

Symptoms

Configuring the source-address persistence/destination-address persistence profile with prefix length 'None' results in a '0.0.0.0' mask and unexpected persistence record.

Impact

The system silently applies a mask of '0.0.0.0' (correct value is '::') on source-address persistence profiles. This can result in incorrect persistence record values.

Conditions

From GUI, Configure source-address persistence/destination-address persistence profiles with prefix length 'None'.

Workaround

You can use either of the following workarounds: -- Use CLI. -- In the GUI, explicitly set 'IPv6 mask length 0' when configuring 'Prefix Length'.

Fix Information

None

Behavior Change