Bug ID 760259: Qkview silently fails to capture qkviews from other blades

Last Modified: Dec 13, 2019

Bug Tracker

Affected Product:  See more info
BIG-IP TMOS(all modules)

Known Affected Versions:
12.1.0, 12.1.0 HF1, 12.1.0 HF2, 12.1.1, 12.1.1 HF1, 12.1.1 HF2, 12.1.2, 12.1.2 HF1, 12.1.2 HF2, 12.1.3, 12.1.3.1, 12.1.3.2, 12.1.3.3, 12.1.3.4, 12.1.3.5, 12.1.3.6, 12.1.3.7, 12.1.4, 12.1.4.1, 12.1.5, 13.0.0, 13.0.0 HF1, 13.0.0 HF2, 13.0.0 HF3, 13.0.1, 13.1.0, 13.1.0.1, 13.1.0.2, 13.1.0.3, 13.1.0.4, 13.1.0.5, 13.1.0.6, 13.1.0.7, 13.1.0.8, 13.1.1, 13.1.1.1, 13.1.1.2, 13.1.1.3, 13.1.1.4, 13.1.1.5, 13.1.3, 13.1.3.1, 13.1.3.2, 14.0.0, 14.0.0.1, 14.0.0.2, 14.0.0.3, 14.0.0.4, 14.0.0.5, 14.0.1, 14.0.1.1, 14.1.0, 14.1.0.1, 14.1.0.2, 14.1.0.3, 14.1.0.4, 14.1.0.5, 14.1.0.6, 14.1.2, 14.1.2.1, 14.1.2.2, 15.0.0, 15.0.1

Fixed In:
15.1.0

Opened: Mar 01, 2019
Severity: 3-Major

Symptoms

When capturing a qkview on a chassis, there are no warnings provided if the qkview utility is run to gather a qkview from other blades.

Impact

There is no warning that the qkview failed for a given blade.

Conditions

-- On a chassis system, rename/move the qkview binary from a given blade. -- Execute qkview on another blade, verify that no warnings or errors are produced.

Workaround

There is no workaround other than running the qkview on the actual blade.

Fix Information

None

Behavior Change