Bug ID 779793: [LC] Error Message "Cannot modify the destination address of monitor" for destination * bigip_link monitor

Last Modified: Jan 20, 2023

Bug Tracker

Affected Product:  See more info
BIG-IP Link Controller(all modules)

Known Affected Versions:
13.1.0, 13.1.0.1, 13.1.0.2, 13.1.0.3, 13.1.0.4, 13.1.0.5, 13.1.0.6, 13.1.0.7, 13.1.0.8, 13.1.1, 13.1.1.2, 13.1.1.3, 13.1.1.4, 13.1.1.5, 13.1.3, 13.1.3.1, 13.1.3.2, 13.1.3.3, 13.1.3.4, 13.1.3.5, 13.1.3.6, 13.1.4, 13.1.4.1, 13.1.5, 13.1.5.1, 14.0.0, 14.0.0.1, 14.0.0.2, 14.0.0.3, 14.0.0.4, 14.0.0.5, 14.0.1, 14.0.1.1, 14.1.0, 14.1.0.1, 14.1.0.2, 14.1.0.3, 14.1.0.5, 14.1.0.6, 14.1.2, 14.1.2.1, 14.1.2.2, 14.1.2.3, 14.1.2.4, 14.1.2.5, 14.1.2.6, 14.1.2.7, 14.1.2.8, 14.1.3, 14.1.3.1, 14.1.4, 14.1.4.1, 14.1.4.2, 14.1.4.3, 14.1.4.4, 14.1.4.5, 14.1.4.6, 14.1.5, 14.1.5.1, 14.1.5.2, 14.1.5.3, 15.0.0, 15.0.1, 15.0.1.1, 15.0.1.2, 15.0.1.3, 15.0.1.4

Fixed In:
15.1.0

Opened: May 06, 2019
Severity: 3-Major

Symptoms

Using BIG-IP Link Controller (LC), every 10 seconds, the system logs messages similar to the following example: -- err mcpd[5570]: 0107082c:3: Cannot modify the destination address of monitor /Common/_user_gslbMonitor_bigipLink_fast_60sec. -- err mcpd[5570]: 01071488:3: Remote transaction for device group /Common/gtm to commit id 1 6681134264373087063 /Common/ELC002.kbn.mlit.go.jp 0 failed with error 0107082c:3: Cannot modify the destination address of monitor /Common/_user_gslbMonitor_bigipLink_fast_60sec..

Impact

LC system failing to load configuration.

Conditions

-- A bigip_link monitor with destination * written in bigip_gtm.conf. -- That monitor is associated with a link. -- The following command is run on one of the sync group peers: tmsh load /sys config gtm-only.

Workaround

Run this command on the LC system that is logging the error message: tmsh load /sys config gtm-only

Fix Information

None

Behavior Change