Bug ID 796045: Tmsh reports Bay2 as Bay1

Last Modified: Mar 24, 2020

Bug Tracker

Affected Product:  See more info
BIG-IP TMOS(all modules)

Known Affected Versions:
13.1.0, 13.1.0.1, 13.1.0.2, 13.1.0.3, 13.1.0.4, 13.1.0.5, 13.1.0.6, 13.1.0.7, 13.1.0.8, 13.1.1, 13.1.1.1, 13.1.1.2, 13.1.1.3, 13.1.1.4, 13.1.1.5, 13.1.3, 13.1.3.1, 13.1.3.2, 14.0.0, 14.0.0.1, 14.0.0.2, 14.0.0.3, 14.0.0.4, 14.0.0.5, 14.0.1, 14.0.1.1, 14.1.0, 14.1.0.1, 14.1.0.2, 14.1.0.3, 14.1.0.4, 14.1.0.5, 14.1.0.6, 14.1.2, 14.1.2.1, 14.1.2.2, 14.1.2.3, 15.0.0, 15.0.1, 15.0.1.1, 15.0.1.2, 15.1.0

Opened: Jun 20, 2019
Severity: 5-Cosmetic

Symptoms

After physically removing a drive from a RAID-based system, tmsh reports Bay2 as Bay1.

Impact

Bay2 as Bay1. The Bay as reported by 'tmsh show sys raid' is the physical slot the SSD is installed in. This issue happens only after a drive is physically removed. Logically removing the drive does not result in this issue.

Conditions

-- Physically remove a drive from a RAID system. -- Run the command: tmsh show sys raid.

Workaround

None.

Fix Information

None

Behavior Change