Last Modified: Apr 17, 2024
Affected Product(s):
BIG-IP TMOS
Known Affected Versions:
14.1.0, 14.1.0.1, 14.1.0.2, 14.1.0.3, 14.1.0.5, 14.1.0.6, 14.1.2, 14.1.2.1, 14.1.2.2, 14.1.2.3, 14.1.2.4, 14.1.2.5, 14.1.2.6, 14.1.2.7, 14.1.2.8, 14.1.3, 14.1.3.1, 14.1.4, 14.1.4.1, 14.1.4.2, 14.1.4.3, 14.1.4.4, 14.1.4.5, 14.1.4.6, 14.1.5, 14.1.5.1, 14.1.5.2, 14.1.5.3, 14.1.5.4, 14.1.5.6, 15.0.0, 15.0.1, 15.0.1.1, 15.0.1.2, 15.0.1.3, 15.0.1.4, 15.1.0, 15.1.0.1, 15.1.0.2, 15.1.0.3, 15.1.0.4, 15.1.0.5, 15.1.1, 15.1.2, 15.1.2.1, 15.1.3, 15.1.3.1, 15.1.4, 15.1.4.1, 15.1.5, 15.1.5.1, 15.1.6, 15.1.6.1, 15.1.7, 15.1.8, 15.1.8.1, 15.1.8.2, 15.1.9, 15.1.9.1, 15.1.10, 15.1.10.2, 15.1.10.3, 15.1.10.4
Opened: Jul 19, 2019 Severity: 4-Minor
After running 'promptstatusd -y' to check current failover status, it displays an incorrect Active/Standby status in the CLI prompt.
Status shown in the prompt does not change.
This occurs under the following conditions: 1. Modify the db variable: bigdb failover.state. 2. Check that /var/prompt/ps1 and CLI prompt reflect the setting. 2. Reboot the BIG-IP system.
Do not run 'promptstatusd -y' command manually. The db variable 'failover.state is a status-reporting variable. The system does not report status manually set to something other than the actual status. Note: 'promptstatusd' is not a BIG-IP user command, it is a daemon. It is highly unlikely that manually running this command will produce information that is useful or relevant to the status being sought.
None