Bug ID 812493: When engineID is reconfigured, snmp and alert daemons must be restarted

Last Modified: Oct 24, 2019

Bug Tracker

Affected Product:  See more info
BIG-IP Install/Upgrade, TMOS(all modules)

Known Affected Versions:
11.6.0, 11.6.0 HF1, 11.6.0 HF2, 11.6.0 HF3, 11.6.0 HF4, 11.6.0 HF5, 11.6.0 HF6, 11.6.0 HF7, 11.6.0 HF8, 11.6.1, 11.6.1 HF1, 11.6.1 HF2, 11.6.2, 11.6.2 HF1, 11.6.3, 11.6.3.1, 11.6.3.2, 11.6.3.3, 11.6.3.4, 11.6.4, 11.6.5, 12.0.0, 12.0.0 HF1, 12.0.0 HF2, 12.0.0 HF3, 12.0.0 HF4, 12.1.0, 12.1.0 HF1, 12.1.0 HF2, 12.1.1, 12.1.1 HF1, 12.1.1 HF2, 12.1.2, 12.1.2 HF1, 12.1.2 HF2, 12.1.3, 12.1.3.1, 12.1.3.2, 12.1.3.3, 12.1.3.4, 12.1.3.5, 12.1.3.6, 12.1.3.7, 12.1.4, 12.1.4.1, 12.1.5, 13.0.0, 13.0.0 HF1, 13.0.0 HF2, 13.0.0 HF3, 13.0.1, 13.1.0, 13.1.0.1, 13.1.0.2, 13.1.0.3, 13.1.0.4, 13.1.0.5, 13.1.0.6, 13.1.0.7, 13.1.0.8, 13.1.1, 13.1.1.1, 13.1.1.2, 13.1.1.3, 13.1.1.4, 13.1.1.5, 13.1.3, 13.1.3.1, 14.0.0, 14.0.0.1, 14.0.0.2, 14.0.0.3, 14.0.0.4, 14.0.0.5, 14.0.1, 14.0.1.1, 14.1.0, 14.1.0.1, 14.1.0.2, 14.1.0.3, 14.1.0.4, 14.1.0.5, 14.1.0.6, 14.1.2, 14.1.2.1, 15.0.0, 15.0.1

Opened: Aug 05, 2019
Severity: 3-Major

Symptoms

The engineID, engineBoots, engineTime values in SNMPv3 traps are shared by both the SNMP and the Alert daemons and are included in traps raised by both daemons. When the engineID is reconfigured then both daemons must be restarted in order to resynchronize the new values.

Impact

This may confuse the SNMP client receiving the trap.

Conditions

Traps issued by the SNMP and Alert daemons may not have engine values that are in sync when the EngineID is first reconfigured. This can happen both with a configuration change and an upgrade.

Workaround

Restart the snmp daemon and then the alert daemon when the engine ID is reconfigured for the first time and the first time after a software upgrade tmsh restart sys service snmpd alertd

Fix Information

None

Behavior Change