Bug ID 864757: Traps that were disabled are enabled after configuration save

Last Modified: Aug 02, 2021

Bug Tracker

Affected Product:  See more info
BIG-IP TMOS(all modules)

Known Affected Versions:
13.0.0, 13.0.0 HF1, 13.0.0 HF2, 13.0.0 HF3, 13.0.1, 13.1.0, 13.1.0.1, 13.1.0.2, 13.1.0.3, 13.1.0.4, 13.1.0.5, 13.1.0.6, 13.1.0.7, 13.1.0.8, 13.1.1, 13.1.1.2, 13.1.1.3, 13.1.1.4, 13.1.1.5, 13.1.3, 13.1.3.1, 13.1.3.2, 13.1.3.3, 13.1.3.4, 14.0.0, 14.0.0.1, 14.0.0.2, 14.0.0.3, 14.0.0.4, 14.0.0.5, 14.0.1, 14.0.1.1, 14.1.0, 14.1.0.1, 14.1.0.2, 14.1.0.3, 14.1.0.5, 14.1.0.6, 14.1.2, 14.1.2.1, 14.1.2.2, 14.1.2.3, 14.1.2.4, 14.1.2.5, 14.1.2.6, 14.1.2.7, 14.1.2.8, 14.1.3, 15.0.0, 15.0.1, 15.0.1.1, 15.0.1.2, 15.0.1.3, 15.0.1.4, 15.1.0, 15.1.0.1, 15.1.0.2, 15.1.0.3, 15.1.0.4, 15.1.0.5, 16.0.0, 16.0.0.1

Fixed In:
16.1.0, 16.0.1, 15.1.1, 14.1.3.1, 13.1.3.5

Opened: Dec 23, 2019
Severity: 4-Minor

Symptoms

The ifLinkUpDownTrapEnable setting is not saved to config files nor UCS. If you have disabled 'link up/down' traps for an interface, save the config, and then load the config files or UCS, all interfaces will have traps enabled, even the ones that were explicitly disabled.

Impact

All interfaces have traps enabled, even the ones that were explicitly disabled.

Conditions

-- Disable 'link up/down' traps for an interface. -- Save the configuration or UCS. -- Reload the configuration or load the UCS.

Workaround

None.

Fix Information

None

Behavior Change