Bug ID 869553: HTTP2::disable fails for server side allowing HTTP/2 traffic

Last Modified: Jan 20, 2023

Bug Tracker

Affected Product:  See more info
BIG-IP LTM(all modules)

Known Affected Versions:
14.1.0, 14.1.0.1, 14.1.0.2, 14.1.0.3, 14.1.0.5, 14.1.0.6, 14.1.2, 14.1.2.1, 14.1.2.2, 14.1.2.3, 14.1.2.4, 14.1.2.5, 14.1.2.6, 14.1.2.7, 14.1.2.8, 14.1.3, 14.1.3.1, 14.1.4, 14.1.4.1, 14.1.4.2, 14.1.4.3, 14.1.4.4, 14.1.4.5, 14.1.4.6, 14.1.5, 14.1.5.1, 14.1.5.2, 14.1.5.3, 15.0.0, 15.0.1, 15.0.1.1, 15.0.1.2, 15.0.1.3, 15.0.1.4, 15.1.0, 15.1.0.1, 15.1.0.2, 15.1.0.3, 15.1.0.4, 15.1.0.5, 15.1.1, 15.1.2, 15.1.2.1, 15.1.3, 15.1.3.1, 15.1.4, 15.1.4.1, 15.1.5, 15.1.5.1, 15.1.6, 15.1.6.1, 15.1.7, 15.1.8, 15.1.8.1, 16.0.0, 16.0.0.1, 16.0.1, 16.0.1.1, 16.0.1.2, 16.1.0, 16.1.1, 16.1.2, 16.1.2.1, 16.1.2.2, 16.1.3, 16.1.3.1, 16.1.3.2, 16.1.3.3

Opened: Jan 16, 2020
Severity: 4-Minor

Symptoms

The BIG-IP system provides an iRule command 'HTTP2::disable serverside' to put http2 in passthrough mode. When the command is called during the CLIENT_ACCEPTED event, it should completely disable http2 until the end of TCP connection, or until the HTTP2::enable command is executed.

Impact

The BIG-IP system continues to send HTTP/2 traffic to a server.

Conditions

-- A virtual server has an HTTP/2 profile configured on the server side. -- An iRule with an the command 'HTTP2::disable serverside' command is attached to the virtual server in the CLIENT_ACCEPTED event.

Workaround

None.

Fix Information

None

Behavior Change