Bug ID 906505: Display of LCD System Menu cannot be configured via GUI on iSeries platforms

Last Modified: Jul 23, 2021

Bug Tracker

Affected Product:  See more info
BIG-IP All(all modules)

Known Affected Versions:
12.1.0, 12.1.0 HF1, 12.1.0 HF2, 12.1.1, 12.1.1 HF1, 12.1.1 HF2, 12.1.2, 12.1.2 HF1, 12.1.2 HF2, 12.1.3, 12.1.3.1, 12.1.3.2, 12.1.3.3, 12.1.3.4, 12.1.3.5, 12.1.3.6, 12.1.3.7, 12.1.4, 12.1.4.1, 12.1.5, 12.1.5.1, 12.1.5.2, 12.1.5.3, 12.1.6, 13.0.0, 13.0.0 HF1, 13.0.0 HF2, 13.0.0 HF3, 13.0.1, 13.1.0, 13.1.0.1, 13.1.0.2, 13.1.0.3, 13.1.0.4, 13.1.0.5, 13.1.0.6, 13.1.0.7, 13.1.0.8, 13.1.1, 13.1.1.2, 13.1.1.3, 13.1.1.4, 13.1.1.5, 13.1.3, 13.1.3.1, 13.1.3.2, 13.1.3.3, 13.1.3.4, 13.1.3.5, 13.1.3.6, 13.1.4, 13.1.4.1, 14.0.0, 14.0.0.1, 14.0.0.2, 14.0.0.3, 14.0.0.4, 14.0.0.5, 14.0.1, 14.0.1.1, 14.1.0, 14.1.0.1, 14.1.0.2, 14.1.0.3, 14.1.0.5, 14.1.0.6, 14.1.2, 14.1.2.1, 14.1.2.2, 14.1.2.3, 14.1.2.4, 14.1.2.5, 14.1.2.6, 14.1.2.7, 14.1.2.8, 14.1.3, 14.1.3.1, 14.1.4, 14.1.4.1, 14.1.4.2, 14.1.4.3, 15.0.0, 15.0.1, 15.0.1.1, 15.0.1.2, 15.0.1.3, 15.0.1.4, 15.1.0, 15.1.0.1, 15.1.0.2, 15.1.0.3, 15.1.0.4, 15.1.0.5, 15.1.1, 15.1.2, 15.1.2.1, 15.1.3, 15.1.3.1, 16.0.0, 16.0.0.1, 16.0.1, 16.0.1.1, 16.0.1.2, 16.1.0

Opened: May 06, 2020
Severity: 3-Major

Symptoms

In the BIG-IP Graphical User Interface (TMUI), display of the System Menu on the LCD front panel of most BIG-IP platforms can be enabled or disabled under System :: Configuration :: Device :: General. However, on iSeries appliances, the 'Display LCD System Menu' option does not appear on this page.

Impact

The 'Display LCD System Menu' option cannot be configured via the GUI.

Conditions

This occurs on the following iSeries appliances: -- i850 -- i2000-series (i2600/i2800) -- i4000-series (i4600/i4800) -- i5000-series (i5600/i5800/i5820-DF) -- i7000-series (i7600/i7600-D/i7800/i7800-D/i7820-DF) -- i10000-series (i10600/i10600-D/i10800/i10800-D) -- i11000-series (i11600/i11800/i11400-DS/i11600-DS/i11800-DS) -- i15000-series (i15600/i15800)

Workaround

You can enable display of the LCD System Menu using the Command Line (CLI) by running the following commands, in sequence: tmsh mod sys global-settings lcd-display [enabled|disabled] tmsh mod sys db lcd.showmenu value [enabled|disabled]

Fix Information

None

Behavior Change