Last Modified: Dec 18, 2024
Affected Product(s):
BIG-IP LTM
Known Affected Versions:
14.1.2, 14.1.2.1, 14.1.2.2, 14.1.2.3, 14.1.2.4, 14.1.2.5, 14.1.2.6, 14.1.2.7, 14.1.2.8, 14.1.3, 14.1.3.1, 14.1.4, 14.1.4.1, 14.1.4.2, 14.1.4.3, 14.1.4.4, 14.1.4.5, 14.1.4.6, 14.1.5, 14.1.5.1, 14.1.5.2, 14.1.5.3, 14.1.5.4, 14.1.5.6, 15.0.0, 15.0.1, 15.0.1.1, 15.0.1.2, 15.0.1.3, 15.0.1.4, 15.1.0, 15.1.0.1, 15.1.0.2, 15.1.0.3, 15.1.0.4, 15.1.0.5, 15.1.1, 15.1.2, 15.1.2.1, 15.1.3, 15.1.3.1, 15.1.4, 15.1.4.1, 15.1.5, 15.1.5.1, 15.1.6, 15.1.6.1, 15.1.7, 15.1.8, 15.1.8.1, 15.1.8.2, 15.1.9, 15.1.9.1, 15.1.10, 15.1.10.2, 15.1.10.3, 15.1.10.4, 15.1.10.5, 15.1.10.6, 16.0.0, 16.0.0.1, 16.0.1, 16.0.1.1, 16.0.1.2
Fixed In:
16.1.0
Opened: May 12, 2020 Severity: 3-Major
LACP system priority is calculated internally using the system MAC. This occasionally results in priority being calculated as 0, which is not accepted by third party devices, such as Cisco.
LACP system priority is calculated as 0 which is rejected by Cisco. Note: BIG-IP administrators have no manual control over setting the LACP system priority value.
-- LACP is enabled on BIG-IP system. -- The last two octets of system MAC are zero.
None.
None
New schema changes added for setting LACP system priority manually.