Bug ID 940837: The iRule command node is not triggered in CLIENT_ACCEPTED with HTTP/2.

Last Modified: Jan 20, 2023

Bug Tracker

Affected Product:  See more info
BIG-IP LTM(all modules)

Known Affected Versions:
14.1.0, 14.1.0.1, 14.1.0.2, 14.1.0.3, 14.1.0.5, 14.1.0.6, 14.1.2, 14.1.2.1, 14.1.2.2, 14.1.2.3, 14.1.2.4, 14.1.2.5, 14.1.2.6, 14.1.2.7, 14.1.2.8, 14.1.3, 14.1.3.1, 14.1.4, 14.1.4.1, 14.1.4.2, 14.1.4.3, 14.1.4.4, 14.1.4.5, 14.1.4.6, 14.1.5, 14.1.5.1, 14.1.5.2, 14.1.5.3, 15.0.0, 15.0.1, 15.0.1.1, 15.0.1.2, 15.0.1.3, 15.0.1.4, 15.1.0, 15.1.0.1, 15.1.0.2, 15.1.0.3, 15.1.0.4, 15.1.0.5, 15.1.1, 15.1.2, 15.1.2.1, 15.1.3, 15.1.3.1, 15.1.4, 15.1.4.1, 15.1.5, 15.1.5.1, 15.1.6, 15.1.6.1, 15.1.7, 15.1.8, 15.1.8.1, 16.0.0, 16.0.0.1, 16.0.1, 16.0.1.1, 16.0.1.2, 16.1.0, 16.1.1, 16.1.2, 16.1.2.1, 16.1.2.2, 16.1.3, 16.1.3.1, 16.1.3.2, 16.1.3.3

Opened: Aug 28, 2020
Severity: 4-Minor

Symptoms

The node iRule command causes the specified server node to be used directly, thus bypassing any load-balancing. However, with HTTP/2, the node command may fail to execute within the CLIENT_ACCEPTED event. This results in no traffic being sent to configured node.

Impact

With HTTP/2 configured, the iRule node command fails to execute within the CLIENT_ACCEPTED event, causing no traffic to be sent to the desired node.

Conditions

-- A node command is used under CLIENT_ACCEPTED event. -- An HTTP/2 profile applied to virtual server. -- The HTTP/2 protocol in use.

Workaround

As a workaround, you may use HTTP_REQUEST event instead of CLIENT_ACCEPTED in iRule syntax.

Fix Information

None

Behavior Change